DiversiTech Condensate Cop Drain Pan Switch

10 items left
  • Description
  • Features
  • Specs
  • Condensate Cop™ is a unique clamp-on float switch intended for HVAC drain pan installation. The Condensate Cop™ features a large over-clamping area that fits easily over the edge of all types of drain pans; including formed plastic and galvanized sheet metal. A separate float/probe assembly swivels to accommodate drain pans having sloped sides. The swivel action allows the installer to position the float switch for best operation and then clamp it into place. The probe features an inlet grill which prevents the float from being blocked or damaged by insulation or other debris. Sealed inside the probe is a magnetically actuated normally closed switch. The switch opens when rising water presents a potential flooding condition. Two wire connection for easy hook up to a thermostat in.Yin. (compressor) circuit. Provided complete with 5’ (1.5 meter) leads, wire nuts, and clamping screws. Small size, 24V/1.5 amp NC reed switch.
    Model Amps Switch Type Voltage
    CC-1 1.5 Amps NC Reed Switch 24 VAC
    • Easy to use.
    • Large over-clamping area that "ts easily over the edge of all types of drain pans; including formed plastic and galvanized sheet metal.
    • Separate !oat/probe assembly swivels to accommodate drain pans having sloped sides.
    • Swivel action allows the installer to position the !oat switch for best operation and then clamp it into place.
    • Probe features an inlet grill which prevents the !oat from being blocked or damaged by insulation or other debris.
    • Two wire connection for easy hook up to a thermostat
    • Can operate contactor coils up to 1.25 Amps.
    • Operates in series with 24 VAC contactor load.
    • Trip Water Level: ~ 1 inch depth from bottom of probe
    • ETL Listed "le number 3166285
    • Provided complete with 5’ (1.5 meter) leads, wire nuts, and clamping screws.