Skip to content

UEi DL200 CATIII Clamp Meter and Voltage Tester

$49.95
Only 2 left in stock - order soon.

Description

Sliding Clamp Jaw
The Sliding Jaw Clamp combines the convenience a fork meter with the accuracy of a closed current clamp meter. The patent pending low profile sliding clamp jaw easily opens to fit in tight spaces and when closed it provides greater accuracy than open fork measurements.

Essential Functionality
The DL200 is an installer’s meter ideal for quick checks or verifying installations with the essential functionality of AC and DC voltage, AC amps, resistance, continuity and data hold and safety rated to CATIII.

Features
The DL200 has a good feel with its’ ergonomic design and thumb leveler to easily slide open and close the clamp jaw. It features connected test leads, built-in test lead storage.

  • Sliding jaw clamp
  • Data hold
  • Auto ranging
  • Low battery indicator
  • Auto power off
  • Permanent test leads
  • Storage for test leads
  • Auto calibration
  • Latches for battery compartment

AC Volts

RANGE RESOLUTION ACCURACY OVERLOAD PROTECTION
1V - 199.9V 0.1V ±(1.5% + 5 dgts) 600V
200V - 600V 1V

DC Volts

RANGE RESOLUTION ACCURACY OVERLOAD PROTECTION
1V - 20V 0.01V ±(1.5% + 3 dgts 600V
21V - 200V 0.1V
201V - 600V 1V
  • Minimum measurement AC mV:500mV /DC mV:40mV
  • Response time (input; AC 100V): 1 sec
  • Max displayed value: 660V AC/DC
  • High warning symbol input voltage > AC30V/ > DC30V
  • Meter beeps input voltage > AC 601V/ > 601V DC
  • Input impedance: 10MΩ
  • TRMS frequency range:
  • Sine wave: 45Hz to 400Hz
  • Overload protection: 600V AC RMS or 600V DC

AC Amps

RANGE RESOLUTION ACCURACY OVERLAD PROTECTION
1A - 200A 0.1A ±(2.0% + 5 dgts) 600V
  • Frequency range: sine wave: 45Hz to 400Hz
  • Maximum displayed value: AC 220A
  • Minimum displayed value: AC 500mA

Resistance

RANGE RESOLUTION ACCURACY OVERLAD PROTECTION
200Ω to 2000Ω 0.1Ω to 1Ω ±(0.8% + 4 dgts) 600V

Continuity

RANGE RESOLUTION ACCURACY OVERLAD PROTECTION
Approx : < 40Ω 50ms 0.987V 600V