Cool Air Products AC SmartSeal Quick Shot Leak Stop 322 Refill Cartridge

AC SMARTSEAL Quick Shot is a leak stop which represents the evolution of AC SMARTSEAL, with a higher effectiveness that has allowed the reduction of the dosage to be used within the unit. Specifically designed to permanently repair leaks both in rubber and metal parts of a system, AC SMARTSEAL Quick Shot guarantees a total seal for leaks. Its mechanical action works within the unit, without any kind of chemical reaction. AC SMARTSEAL Quick Shot is polymer free: it is not reactive to oxygen and moisture and is suitable for any type of lubricant and refrigerant gas.  *Note: This is the refill cartridge only. Features: Ideal for preventing refrigerant leaks or direct repairs Permanently seal leaks of refrigerant gas in AC and refrigeration systems Compatible with all refrigerants Polymer free Approved by OEMs Not activated by oxygen or moisture Non-clogging of all components How to use: Turn the A/C system on. If the unit is a heat pump, be sure it is set on cooling mode. Connect the cartridge to Easy Inject and fully inject sealant in it. Connect Easy Inject to the low-pressure service port of A/C system. Connect a charging hose to a refrigerant cylinder. Briefly open the cylinder valve to purge air out of the charging hose. Quickly tighten the charging hose fitting to Easy Inject. Inject refrigerant through Easy Inject and push sealant into the A/C system. Run A/C system for 30 minutes to allow the product to fully circulate.